Introduction
BUC3C series industrial digital cameras have hardware frame buffer, the speed is much higher than common digital cameras. BUC3C series digital cameras are bigger than BUC3B series digital cameras. With USB2.0 interface, from 0.36 mega-pixel to 14.0 mega-pixel colorful and mono digital cameras are available. Among these cameras, 0.36 mega-pixel digital camera has high sensitivity, high dynamic range, global shutter, hardware frame buffer and high-speed features. Other digital cameras have high sensitivity, high dynamic range, rolling shutter, hardware frame buffer and high-speed features. BUC3C series digital cameras are widely used in machine vision and a variety of image acquisition areas.
Features
1. Multiple mounting angles, suitable for all kinds of industrial production equipments’ installation requirements;
2. Real industrial colorful/mono CMOS image sensor with high sensitivity, high dynamic range, no compression, no interpolation. 0.36 mega-pixel digital camera is global shutter, other digital cameras are rolling shutter;
3. With board frame buffer, double buffer preview, real-time acquisition with external trigger;
4. High-speed USB2.0 interface, up to 480Mb/s;
5. Support extraction modes, users can choose AOI area(Area of Interest), the image frame rate is greatly speed up after the extraction;
6. Separate image capture and preview, support high-speed preview, high-quality acquisition; Support SKIP2/SKIP4/SKIP8 3 extraction modes, the image frame rate multiplied after the extraction;
7. The brightness of all modes and resolution switch is the same;
8. Gamma correction, extended RGB gain, color reproduction more realistic;
9. Support for still image capture (JPG, BMP), image color is rich and vivid;
10. Support 8-bit, 24-bit, 32-bit bitmap preview and capture(Mono camera support 8-bit bitmap);
11. Support uncompressed, compressed videos:
12. Provide completed API for users’ Secondary development, provide Demo Source Code;
13. Hardware automatic gain control (AGC) and Exposure Control (AEC);
14. Software auto white balance, auto exposure, continuous auto exposure control;
15. Users can program to control white balance and exposure area;
16. Support the plug recovery during acquisition and preview;
17. Support firmware upgrade on-line;
18. Plug and play, dispense with external power supply;
19. Support Windows XP / Vista / 7 Operation System;
20. Support VC, VB, DELPHI, LABVIEW and other development language;
21. Fix the USB cable on the camera with bolt, USB cable can not fall off;
22. Support Twain;
23. Support for standard C-mount lenses and all kinds of customized lenses;
24. Durable aluminum alloy shell;
25. Support external trigger acquisition and flash light control.
Specification
|
Model
|
BUC3C-130C/M
|
|
Description
|
USB2.0 colorful/mono CMOS 1.3MP industrial digital camera with board frame buffer
|
|
Image Sensor
|
1/2 inch, colorful/mono 1.3MP CMOS Image Sensor
|
|
Pixel Size
|
5.2μm×5.2μm
|
|
Spectral Response
|
400nm～1000nm
|
|
Sensitivity
|
1.8V/lux-sec@550nm
|
|
Scan Mode
|
Progressive Scan
|
|
Exposure Mode
|
Electronic rolling shutter
|
|
Max Resolution
|
1280 × 1024
|
|
Frame Rate
|
25fps@1280 × 1024(Colorful)
75fps@1280 × 1024 SKIP2(Colorful)
28fps@1280 x 1024(Mono)
80fps@1280 x 1024 SKIP2(Mono)
|
|
White Balance
|
Auto / Manual
|
|
Exposure Control
|
Auto / Manual, software/hardware
|
|
Image Output
|
USB2.0, 480Mb/s
|
|
Power
|
USB2.0 Power Supply, 500mW
|
|
Dynamic Range
|
62dB
|
|
Signal-to-Noise
|
45dB
|
|
Programmable control
|
Image size, Contrast, brightness, gain, exposure time
|
|
Software Function
|
Image display, image processing, video
|
|
Working Temperature
|
0°C~60°C
|
|
Accessories
|
Equipped with standard infrared filter(not available in mono camera), C/CS mount connecting ring, 2m USB cable, 1 CD with software and SDK.
|
|
Camera Net Weight
|
200g
|
|
Camera Dimension
|
62mm×62mm×45mm (length × width × height)
|
|
Box Dimension
|
118mm×108mm×96mm (length × width × height)
|
